Pentens T-007 Cement Modifier Waterproofing Primer Acrylic Polymer 20KG

Description
PENTENS T-007 is a 100% acrylic cement modifier based on a proven 100% acrylic polymer designed to improve the chemical, corrosion, moisture, and salt resistance of cement renders. It is superior compared to most PVA and SBR-based modifiers because of its superior durability and resistance to hydrolysis. It has been specially formulated for use in high-alkaline cement environments. Cement mortars based on PENTENS T-007 will adhere to a wide range of materials such as metals, timber, insulation foams as well as new and old concrete.

Features
• 100% acrylic cement modifier based on a proven 100% acrylic polymer.
• Designed to improve the chemical, corrosion, moisture, and salt resistance of cement renders.
• It is superior compared to most PVA and SBR-based modifiers because of its superior durability and resistance to hydrolysis.
• Specially formulated for use in high alkaline cement environments.
• It is the primer better to use before applying for Pentens T-100 / T-200 / T-200h.

Benefits
• Increases the durability of concrete and mortars.
• Waterproof.
• Great resistance against acids, alkalis, fats & oils.
• Increases abrasion resistance.
• Increases tensile, flexural, impact, and compressive strengths.
• Excellent UV durability.

Specifications
• Form: Emulsion
• Appearance: Milky
• Density (kg / ltr): 1.01
• Solid Content (%): > 45
• Viscosity (Brookfield), (cP): 3000 (approx.)
• Shelf Life: At least 1 year when unopened and undamaged
• Storage Condition: Store in a dry, cool place

Areas of application include:
• As a primer for water-based waterproofing/flooring works.
• Repairs to drinking water and wastewater concrete structures.
• Repairs and resurfacing of factory floors and driveways.
• Angle fillets.
• Multi-purpose adhesive.

Uses 
Not only used as waterproofing primer, but also as an additive in cement mortars, renders, patching/repair work, GRC panels and waterproof cementitious coatings.
Areas of application include:
• As a primer for water-based waterproofing / flooring works
• Repairs to drinking water and waste water concrete structures
• Repairs and resurfacing of factory floors, driveways
• New and old concrete bonding agent.
• Angle fillets
• Multi-purpose adhesive

Instruction of Use:
Surface Preparation
• All surfaces must be clean, and free from grease, oil & laitance. Remove all dirt and contaminants that might affect adhesion
• Substrates should be primed with a 1:3 mixture of PENTENS T-007 & water
• Brush onto the surface at an approximate rate of 0.2kg/m²
• Allow it to become tacky before applying the topping
• For porous surfaces, prime with a slurry coat

Application
Apply on concrete and mortar surfaces as per normal practices.

Safety
• Impervious gloves and barrier creams should be used when handling these products.
• Eye protection should be worn. If contacts with eyes occur, rinse immediately with plenty of water and seek medical advice if symptoms persist.
• If contact with skin occurs, it must be removed before curing takes place.
• Wash off with an industrial skin cleanser followed by plenty of soap and water.
• Do not use solvent.
• Ensure adequate ventilation when using these products.